Design of Car’s Security System Using Fingerprint and Arduino GSM Module

Design of Car’s Security System Using Fingerprint and Arduino GSM Module

Abstract

The main purpose of this project is to design and implement high security system of car. Security is a prime concern in our day-to-day life. it has been playing a key role in our places like offices, institutions, libraries, laboratories, car… etc. Perhaps the most important application of  accurate personal identification is securing limited access systems from malicious attacks in order to keep our data confidentially so that no other unauthorized person could have an access on them. Nowadays, at every point of time, we need security systems for protection of valuable data, car and even money. The fingerprint and password based security system presented here is an access control system that allows only authorized persons to access a car. The implemented of security system based on fingerprint, password and GSM technology which can activate, authenticate, and validate the user and unlock the car in real time for locker secure access. Fingerprints are one of many forms of biometrics, used to identify individuals and verify their identity. Fingerprint is sensed by sensor and is validated for authentication. If the fingerprint matches, the door will be opened automatically and GSM will send SMS contain the password to turn the car‟s engine which will change randomly.

This high security system based on fingerprint, password and GSM technology can be organized in the money transfer cars or any transfer which needs high security information.

TABLE OF CONTENTS

Title	Page
اآليح	I
Dedication	II
Acknowledgement	III
Abstract	IV
يسرخهض	V
Table of Contents	VI
List of Figures	VIII
List of Abbreviations	IX
CHAPTER ONE INTRODUCTION
1.1General concepts	1
1.2 Problem statement	2
1.3 Proposed solution	2
1.4 Objectives	2
1.5 Methodology	3
1.6 Thesis layout	3
CHAPTER TWO LITERATURE REVIEW
2.1 Introduction	5
2.2 Previous works	5
2.3 Fingerprint sensor	8
2.3.1 Optical Fingerprint Sensor	9
2.3.2 Ultrasonic Fingerprint Sensor	11
2.3.3Capacitance Fingerprint Sensor	12
2.3.4 Identification technologies	14
2.4 Arduino Microcontroller	15
2.4.1 Arduino hardware	16
2.4.2Arduino Software	18
2.4.3 Arduino UNO Design	19
2.5 Global System for Mobile communications	21
2.5.1 GSM Features	22
2.5.2 Hardware Description of GSM module:	23

2.6 Liquid Crystal Display (LCD)	26
2.6.1 Basic structure of an LCD	27
CHAPTER THREE SYSTEM IMPLEMENTATION
3.1Introduction	28
3.2 Block Diagram of the System	28
3.3 Flow Chart of the System	29
3.4 Description of the System	30
3.5 Signal Movement	30
CHAPTER FOUR RESULTS AND DICUSSION
4.1Introduction	32
4.2 System Implemention	32
4.2.1 Case (1)	33
4.2.2 Case (2)	37
CHAPTER FIVE CONCLUSION AND RECOMMENDATIONS
5.1Conclusion	39
5.2 Recommendations	39
References	40
APPENDIXES

Download Full Material-N5000